SILICONE HIGH BUILD COATING™
SILICONE HIGH BUILD COATING™
Silicone High Build Coating™ – 100% Seamless Protection
Référence # 18
DESCRIPTION
Silicone High Build Coating™ is a premium-grade, high-solids roof coating engineered for extreme durability, waterproofing, and energy efficiency. This 100% silicone formula is solvent-free and moisture-cured, forming a seamless, flexible membrane that resists ponding water and harsh weather conditions. Its low viscosity makes application fast and clean, while its brilliant white finish reflects solar heat to lower rooftop temperatures and reduce energy costs. Approved for a wide range of roofing systems, this coating is the go-to solution for contractors seeking long-term protection and reduced maintenance needs.
-
Creates a seamless waterproof barrier that resists ponding water
-
Bright white, UV-reflective surface reduces energy loads
-
Bonds to metal, TPO, EPDM, PVC, spray foam & more — even unprimed
-
Flexible and crack-resistant across temperature extremes
-
Solvent-free and compliant with environmental standards
Cure Time: Tack-free in 2–4 hours depending on conditions.
Note: Not intended for use on asphalt shingle roofs.
Quantité et couleur : Sold in 5-gallon pails. Cures white.
Caractéristiques
Caractéristiques des matériaux humides :
| Viscosité | 105 – 110 KU |
| Poids par gallon | 8,4 à 8,8 livres. |
| Solides | 90% |
| Point d'éclair du solvant | 104° F |
| COV | <50 g/L |
Revêtement durci :
| Sec au toucher à 77 °F (humidité relative 50%) | ~ 4 heures |
| Élongation ultime | 468% min. |
| Résistance à la traction ultime | 205 psi min. |
| Adhésion au pelage | 2,4 plis |
| Perméabilité à la vapeur d'eau | 6.7 Perms |
| Absorption d'humidité -7 jours d'immersion- | <0.45%> |
| La température de service | -40° – 140° F |
FAQ
Q: Can this be applied over an existing elastomeric coating?
A: Yes. Silicone High Build Coating™ adheres well to elastomerics, aluminum coatings, and more.
Q: Is a primer needed for application?
A: In most cases, no primer is needed—especially on weathered TPO, EPDM, or foam.
Q: How long does Silicone High Build Coating™ last?
A: When properly applied and maintained, the coating can last 15–20 years.
Ressources
© 2024 Topps Products, Inc. All Rights Reserved.