SILICONE HIGH BUILD COATING™
SILICONE HIGH BUILD COATING™
Silicone High Build Coating™ – 100% Seamless Protection
Referencia # 18
DESCRIPCIÓN
Silicone High Build Coating™ is a premium-grade, high-solids roof coating engineered for extreme durability, waterproofing, and energy efficiency. This 100% silicone formula is solvent-free and moisture-cured, forming a seamless, flexible membrane that resists ponding water and harsh weather conditions. Its low viscosity makes application fast and clean, while its brilliant white finish reflects solar heat to lower rooftop temperatures and reduce energy costs. Approved for a wide range of roofing systems, this coating is the go-to solution for contractors seeking long-term protection and reduced maintenance needs.
-
Creates a seamless waterproof barrier that resists ponding water
-
Bright white, UV-reflective surface reduces energy loads
-
Bonds to metal, TPO, EPDM, PVC, spray foam & more — even unprimed
-
Flexible and crack-resistant across temperature extremes
-
Solvent-free and compliant with environmental standards
Cure Time: Tack-free in 2–4 hours depending on conditions.
Note: Not intended for use on asphalt shingle roofs.
Cantidad y Color: Sold in 5-gallon pails. Cures white.
Especificaciones
Características del material húmedo:
| Viscosidad | 105 – 110 KU |
| Peso por galón | 8.4 - 8.8 libras |
| Sólidos | 90% |
| Punto de inflamación del solvente | 104°F |
| COV | <50 g/L |
Revestimiento curado:
| Secado al tacto @ 77° F (50% humedad relativa) | ~ 4 horas |
| Elongación máxima | 468% min. |
| Resistencia a la tracción | 205 psi min. |
| Peel Adhesión | 2,4 pl |
| Permeabilidad al vapor de agua | 6.7 Perms |
| Absorción de humedad -7 días de inmersión- | <0.45%> |
| Temperatura de servicio | -40° - 140° F |
preguntas frecuentes
Q: Can this be applied over an existing elastomeric coating?
A: Yes. Silicone High Build Coating™ adheres well to elastomerics, aluminum coatings, and more.
Q: Is a primer needed for application?
A: In most cases, no primer is needed—especially on weathered TPO, EPDM, or foam.
Q: How long does Silicone High Build Coating™ last?
A: When properly applied and maintained, the coating can last 15–20 years.
Recursos
© 2024 Topps Products, Inc. All Rights Reserved.