Metal Roof Repairs With Topps Products.

Replace fasteners

Ebedding PolyCore

Polyprene repair

Flashing repair with Polyprene

RivetGuard seals seams

PolyCore reinforcement

Repairs most always indicate need for additional work to prevent further problems. Using Topps repair materials you can convert some of the roofs most critical areas into the strongest. This together with a well thought out maintenance plan to prevent further issues has proven to be the most prudent approach to your roofs service life.

Topps repair products are formulated using 100% rubber, making them the strongest, most resilient, and most versatile products for repairing roofs on the market today.

RUST

Wash away rust when you power wash. Apply RustArrestor at the rate of 1 gallon per 300 sq. ft. of surface area 24 hours prior to power washing, to neutralize rust and leave a surface ready for coating.

FASTENER SEALS

Apply RivetGuard to all fasteners by spray, caulk gun, pole dipped into material, or a 2-liter soda bottle with a 1/4-inch hole in cap.

SEAMS

RivetGuard conveniently sprays on or applied with a long-handled roofing brush. So strong, it doesnt require the labor of installing fabric in most instances. Seals seams and joints. Builds extra thickness at the edges where metal overlaps occur.

SKYLIGHTS

Evenly apply liquid Polyprene at approximately 1/4 inch thick. Goes on using a stiff paint brush or rubber glove (available in Heavy Brush and Trowel Grades).

POLYCORE

Reinforces hard to seal areas with a super-strong band of woven 100% polyester membrane that is easliy imbedded into the Topps rubber liquid of your choice.

PROTRUSIONS

Evenly apply liquid Polyprene at approximately 1/4 inch thick or RivetGuard at 2 gal. per square. A dry, long-handled roofing brush or rubber glove may be used to assist application. Seal it up after with the Topps rubber of your choice.